Download Inhoudsopgave Inhoud Print deze pagina

Setting The Extension/Flexion Limit - bort medical BORT GenuXpress ACL Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 24
EN
4
Close the fasteners in the following order, always from the centre of the knee downwards, then from
the middle of the knee upwards:
1. Front fastener close to the knee on the lower leg
2. Front fastener close to the knee on the thigh
3. Rear fastener close to the knee on the lower leg
4. Fastener away from the knee on the lower leg
5. Fastener close to the knee on the thigh
6. Fastener away from the knee on the thigh
Whilst tightening the fastener, smoothen it in the tension direction with your free hand. This avoids twisting
the brace on the leg.
Important: Let the patient try walking. Check for possible pressure, if required the brace frame can be
reshaped. Be careful not to damage the brace frame.
5+6

Setting the extension/flexion limit:

If required, it can be necessary to restrict the scope of the brace's movement.
1. Remove the outer joint cover. For this, lift the fastener flap and slide the cover away downwards.
2. The joints are marked with "A" and "B". Remove the existing limit stop from the joint and take the
required limit stop from the limit stop set provided. They are also market with the letters "A" and "B", the
angular degrees noted on the limit stop wedges.
Extension wedges are marked with an "E", flexion wedges with an "F".
3. Insert the limit stop into the joint.
4. Finally, re­attach the joint cover, place the cover on the joint for this purpose. Press the cover on evenly
so that the release flap protrudes slightly upwards and slide the cover upwards until it engages.
The following restrictions are available:
– Extension: 0°, 5°, 10°, 15°, 20° and 25°
– Flexion: 0° (180°), 30°, 45°, 60°, 75° and 90°
Material composition
Frame pad: 60% EVA foam, 40% polyester
Fastening straps: 100% polyamide
Fastening straps pad: 74% polyurethane, 26% polyether
Cleaning information
Hand­washing
Do not clean chemically
Can be cleaned using mild detergents and lukewarm water. Close the Velcro fasteners in order to avoid
damaging items of clothing, for example. Air dry it and avoid heat.
Guarantee
The legal regulations of the country in which you acquired the product apply to the purchased product.
Please contact your specialist retailer if you suspect a warranty claim. Please clean the product before
10
Do not bleach
Do not dry in a tumble dryer
Do not iron

Advertenties

Inhoudsopgave
loading

Inhoudsopgave