Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Tip
If only the time and the clock symbol are shown in the display, you can adjust the time.
By pressing the clock button once or twice, the hours and minutes will start flashing.
During the flashing, you can use the adjust knob to change the hours and the minutes.
Attention!
It is also possible to use the microwave immediately without setting the current time
first. In this case, you will see a flashing ':' in the display before and after the cooking
procedure.
Quick start
If you want to start the microwave immediately, without making any settings in advance, you can
use the quick button.
Attention!
Make sure that there hasn't been made other settings before; in advance, only the time
and the clock symbol are shown in the display.
Tip
During cooking you can increase or decrease the time by turning the adjust knob.
End
EN 12
1. Press the quick button.
The microwave starts for 1 minute at full power. In the display
▷
the time will count down.
▷
The symbols belonging to the setting that has been made
appear in the display.
2. After 1 minute you will hear three beeps.
'End' appears in the display.
▷
3. Press the stop button or open the door.
After every cooking procedure, 'End' appears in the display and the
microwave turns off. You will hear three beeps to remind you to take out
the food.
•
Press the stop button or open the door.
▷
The time and the clock symbol appear in the display again.
Advertenties
Hoofdstukken
Inhoudsopgave
