Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
Installation
1
Center the bottom trim in the opening.
2
Align the front edge of the bottom trim with the front of
the opening. Refer to the illustration below.
Align the holes on the bottom of each slide with the
3
studs on the trim, then place the slides on the bottom
trim.
4
Verify the distance between the slides is 470 mm. Refer
to the illustration below.
5
If necessary, use the shim material provided, then
secure the slides to the cabinet with 12 screws per slide.
6
Extend the slides to full extension.
7
Place the unit on the slides.
470
mm
Bottom trim alignment
Slide installation
6 | English
8
1
Rotate the leveling cams to level the front of the unit,
then push the locking tabs. Refer to the illustration
below.
9
2
Install and hand-tighten a screw from the bottom of
each slide to secure the unit to the slides.
Plug the power cord into the receptacle.
10
3
11
4
Place the cord into the clip at the top of the opening.
LEVELING
CAM
LOCKING
TAB
Level unit
Prior to Use
1
Slide the unit forward and press the main power button.
Refer to the illustration below.
2
Use the test strip provided to determine water hard-
ness. Refer to User Options in the Use and Care Guide
to adjust the hardness setting.
Clean the unit thoroughly with hot water and a mild
3
detergent.
4
Rinse and dry with a soft cloth.
5
Open the service door, then remove the water tank.
Refer to the illustration below. NOTE: If installed, the
water spout must be removed to open the service door.
6
Fill the water tank with water.
MAIN POWER
BUTTON
WATER TANK
Main power button
Water tank
7
1
Insert the hot water spout. Two beeps indicate the
spout is installed correctly. Refer to the illustration
below.
8
2
Place the rinse container below the spout.
9
Select the desired language. To select, scroll through
3
the languages until the desired language appears, then
touch the corresponding icon.
10
4
Touch
. Hot water is dispensed from the hot
water spout.
RECEPTACLE
Hot water spout
Advertenties
Inhoudsopgave
Probleemoplossen
