Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Screw the 2 x 2 swivel castors (3) with the 4 capped nuts (2) onto the ends of the two
wheel supports (1). The wheels should be at the hollow side!
Turn the radiator upside-down (make sure you don't scratch the paint or the floor!)
Attach the two supports (each with 2 swivel castors) to the radiator. Slide the U-
shaped bolts onto both sides between the outer fins of the radiator, the end the screw
thread and the outwards facing curve.
First slide the supports (with the swivel castors) over the curve and then over the end
of the screw thread.
Please note: the wheels should be placed as far away from one another
as possible!
Return the heater to its upright position, wheels down.
Select a suitable location for the device taking into account all the aforementioned
warnings in this manual.
Warning: only use the heater when it is in an upright position, with the wheels
attached to the bottom (as pictured on the front of this manual). Any other position is
dangerous!
Set-up and Operation
Set the power switches to off (underside not depressed) and the thermostat dial to
HIGH (maximum).
Plug in the heater.
In order to switch on the heater, set one or both power switches to l.c.q. II. The light(s)
on the related switch(es) turn(s) on and the heater starts to function. For slow heating,
a small rise in temperature or a small space, choose setting I (800W). For quick
heating, a bigger temperature rise or a larger space, choose setting II (1200W). I and II
together give full power (2000W).
28
Advertenties
Inhoudsopgave
