Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CV1004
9
Maintaining and cleaning the vacuum
cleaner
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
10
Troubleshooting
I
NOTE
The vacuum cleaner is equipped with a thermal overload protection
which prevents the motor from overheating.
If the motor stops, switch the device off by setting the switch to position
"O" or disconnecting the suction hose from the external hose socket.
Let the device cool down for around 1 hour. If this fault still occurs
following the troubleshooting measures described below, then please
contact the manufacturer or your dealer.
If the motor stops, switch off the vacuum cleaner and proceed as follows:
➤ Check whether the suction hose is blocked.
Hold the suction hose up and drop a small coin in from above. If the coin does
not fall through the hose, it is blocked. Push the dirt ball through the hose using
a long rod.
➤ Check the dust bag.
If a large amount of dirt which is not household dust (plasterboard dust,
fine sawdust etc.) is vacuumed up, the pores in the dust bag can get blocked.
Insert a new dust bag.
EN
Maintaining and cleaning the vacuum cleaner
17
Advertenties
Hoofdstukken
Inhoudsopgave
