Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Using the vacuum cleaner
8.3
Changing the dust bag
A
NOTICE!
It is important for vacuum cleaner suction that the dust bag is fitted
correctly. Please follow the instructions carefully, see fig. e, page 6 to
fig. l, page 7.
I
NOTE
• The dust bag has two openings. One of the two ends has two
arrows. This end must be attached on the device with the arrows
pointing upwards (fig. j, page 7). Make sure the dust bag is fitted
in the correct position.
• Firstly remove the opening from the connecting nozzle in the device
and then remove the other opening from the connecting nozzle on
the front of the device. Hold the openings upwards to prevent any
dust falling out.
• Replace or clean the motor filter after you have changed the dust bag
five times.
➤ Change the dust bag (fig. e, page 6, to fig. l, page 7).
8.4
Replacing and cleaning the motor filter
I
NOTE
Replace or clean the motor filter after you have changed the dust bag
five times or if it is heavily soiled.
You can wash the motor filter by hand in mild soapy water. Do not wash
it in a washing machine or with hard objects. Leave it to dry before fitting
it in the vacuum cleaner in the direction of the arrows.
➤ Remove the motor filter and insert a new one or reinsert the cleaned motor filter
(fig. m, page 7 and fig. n, page 7).
16
CV1004
EN
Advertenties
Hoofdstukken
Inhoudsopgave
