Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CV1004
6.1
Control elements
No. in
fig. 2, page 3
1
2
3
4
7
Installing the vacuum cleaner
!
WARNING! Danger of electrocution and serious injury.
Beware of electrical cables in the wall when drilling and sawing.
A
NOTICE!
• Mount the vacuum cleaner in a dry place.
• Do not mount the vacuum cleaner in an area which is subject to high
temperatures.
• Do not bend the connection cable round sharp edges or corners.
Keep the connection cable away from heated surfaces.
• To install the vacuum cleaner, the wall thickness must be a minimum
of 10 mm and a maximum of 25 mm.
• Ensure there is a socket nearby which can be used to supply the
vacuum cleaner with power. Do not use extension cables.
• If the vacuum cleaner is being installed in small spaces with poor
ventilation (e.g. cabinet), then an air outlet and an air outlet grille with
a cross-section of 70 mm must be installed in order to transport warm
air generated by the device outside.
➤ Ensure that the dust bag and the motor filter are in place.
➤ Check the vacuum cleaner works prior to installation.
EN
Description
I/O switch
Sliding cover
Slider
Motor filter
Installing the vacuum cleaner
Explanation
Switches the vacuum cleaner on or off
whenever the suction hose is connected to
the central vacuum cleaner.
Closes up the hose connection on the
device. Closing increases the suction when
working from an external hose socket.
Opens the front of the device (e.g. for
changing the dust bag)
Protects the motor from contamination
13
Advertenties
Hoofdstukken
Inhoudsopgave
