Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OBJ_BUCH-2992-002.book Page 11 Wednesday, September 6, 2017 11:43 AM
Inform yourself about the valid regulations/laws for your
country concerning the handling of materials that are haz-
ardous to one's health.
Use the vacuum cleaner only when you
WARNING
fully understand and can perform all
functions without limitation, or have received appropri-
ate instructions. A thorough introduction reduces operating
errors and injuries.
The vacuum cleaner is suitable only for
WARNING
vacuuming dry materials. The penetra-
tion of liquids increases the risk of an electric shock.
Use the socket only for the purposes
WARNING
specified in the operating instructions.
The vacuum cleaner may only be
used and stored indoors. The pene-
tration of rain or moisture into the vacuum cleaner lid increas-
es the risk of an electric shock.
When operating the vacuum cleaner in damp environ-
ments, use a residual current device (RCD). Using a re-
sidual current device (RCD) reduces the risk of an electric
shock.
Connect the vacuum cleaner to a properly earthed
mains supply. The socket outlet and the extension cable
must have an operative protective conductor.
Before each use, check the vacuum cleaner, cable and
plug. Do not use the vacuum cleaner when defects are
detected. Do not open the vacuum cleaner yourself and
have it repaired only by qualified personnel using orig-
inal spare parts. Damaged vacuum cleaner, cables and
plugs increase the risk of an electric shock.
Before maintaining or cleaning the vacuum cleaner,
making any adjustments, changing accessories or plac-
ing the vacuum cleaner aside, remove the plug from the
socket outlet. This safety measure prevents accidental
starting of the vacuum cleaner.
Provide for good ventilation at the working place.
Have the vacuum cleaner repaired only through quali-
fied specialists and only using original spare parts. This
ensures that the safety of your vacuum cleaner is main-
tained.
Before restarting, check the proper condition of the
vacuum hose. When doing this, leave the vacuum hose
mounted to the vacuum cleaner to prevent dust from
coming out. Otherwise, you could possibly inhale dust.
Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Bosch Power Tools
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Symbols and their meaning
Automatic Start/Stop feature
Extraction of dust resulting from run-
ning power tools
The vacuum cleaner automatically
switches on and off with a time delay
Switching Off
Vacuuming
Vacuuming of deposited dust
Specification of the allowable load of
max. 2000W
the connected power tool (country-
min. 100W
specific)
Product Description and Specifica-
tions
Intended Use
The vacuum cleaner is intended for vacuuming dry materials
that are not harmful to one's health, and it is especially suita-
ble for vacuuming dust and chips on power tools.
The vacuum cleaner is intended only for private use and not
for professional use.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Vacuum-hose holder
2 Mode selector switch
3 Cable holder
4 Socket for power tool
5 Carrying handle
6 Holder for crevice nozzle/floor nozzle
7 Hose connection piece
8 Release button for dust cup
9 Dust cup
10 Vacuum hose
11 Curved nozzle*
12 Extraction adapter
13 Crevice nozzle
14 Floor nozzle
15 Snap-fastener
16 Connection flange
English | 11
1 609 92A 43U | (6.9.17)
Advertenties
Inhoudsopgave
