Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Victron energy Handleidingen
  4. Controleurs
  5. BlueSolar MPPT 100/30
  6. Handleiding

Victron energy MPPT 100/30 Handleiding pagina 4

Verberg thumbnails Zie ook voor MPPT 100/30:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 17
Alternatively, Bluetooth communication can be set up between a
BMV-712 battery monitor with battery temperature sensor and the
solar charge controller (VE.Direct Bluetooth Smart dongle
needed).
For more detail please enter smart networking in the search box
on our website.
1.8 Automatic battery voltage recognition
The controller will automatically adjust itself to a 12V or a 24V
system one time only.
If a different system voltage is required at a later stage, it must be
changed manually, for example with the Bluetooth app.
1.9 Flexible charge algorithm
Fully programmable charge algorithm, and eight preprogrammed
algorithms, selectable with a rotary switch.
1.10 Adaptive three step charging
The Controller is configured for a three-step charging process:
Bulk – Absorption – Float.
1.10.1. Bulk
During this stage the controller delivers as much charge current
as possible to rapidly recharge the batteries.
1.9.2. Absorption
When the battery voltage reaches the absorption voltage setting,
the controller switches to constant voltage mode.
When only shallow discharges occur the absorption time is kept
short in order to prevent overcharging of the battery. After a deep
discharge the absorption time is automatically increased to make
sure that the battery is completely recharged. Additionally, the
absorption period is also ended when the charge current
decreases to less than 2A.
1.10.3. Float
During this stage, float voltage is applied to the battery to
maintain it in a fully charged state.
1.10.4. Equalization
See section 3.8
1.11 Remote on-off
The MPPT 100/50 can be controlled remotely by a VE.Direct non
inverting remote on-off cable (ASS030550300). An input HIGH
(Vi > 8V) will switch the controller on, and an input LOW (Vi < 2V,
or free floating) will switch the controller off.
2

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Victron energy MPPT 100/30

Gerelateerde Producten voor Victron energy MPPT 100/30

Deze handleiding is ook geschikt voor:

Mppt 100/50

Inhoudsopgave