Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Victron energy Handleidingen
  4. Controleurs
  5. BlueSolar MPPT 100/30
  6. Handleiding

Victron energy MPPT 100/30 Handleiding pagina 10

Verberg thumbnails Zie ook voor MPPT 100/30:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 17
On all models with software version V 1.12 or higher a binary
LED code helps determining the position of the rotary switch.
After changing the position of the rotary switch, the LEDs will
blink during 4 seconds as follows:
Switch
position
0
1
2
3
4
5
6
7
Thereafter, normal indication resumes, as described below.
Remark: the blink function is enabled only when PV power is
present on the input of the controller.
3.6 LEDs
LED indication:
 permanent on
 blinking
 off
Regular operation
Bulk (*1)
Absorption
Automatic equalisation
Float
Note (*1): The bulk LED will blink briefly every 3 seconds when
the system is powered but there is insufficient power to start
charging.
Fault situations
Charger temperature too high
Charger over-current
Charger or PV over-voltage
Internal error (*2)
Note (*2): E.g. calibration and/or settings data lost, current sensor
issue.
8
LED
LED
Bulk
Abs
1
1
0
0
0
1
0
1
1
0
1
0
1
1
1
1
LEDs
LEDs
LED
Float
frequency
1
1
0
1
0
1
0
1
Bulk
Absorption
Bulk
Absorption
Blink
Fast
Slow
Slow
Slow
Slow
Slow
Slow
Slow
Float
Float

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Victron energy MPPT 100/30

Gerelateerde Producten voor Victron energy MPPT 100/30

Deze handleiding is ook geschikt voor:

Mppt 100/50

Inhoudsopgave