Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. HOLZMANN-MASCHINEN Handleidingen
  4. Schuurmachines
  5. SM 100
  6. Gebruiksaanwijzing

Disposal; Trouble Shooting - HOLZMANN-MASCHINEN SM 100 Gebruiksaanwijzing

Verberg thumbnails
Inhoudsopgave

Advertenties

14.3

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
15

TROUBLE SHOOTING

Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Machine stops or will not start
Machine slows down during
working
Bad grinding results
To rapid wear of
Work piece burns during the
working process
MANY MALFUNCTIONS AND DEFECTS CAN BE AVOIDED BY LETTING THE MACHINE BE
CONNECTED TO YOUR POWER SUPPLY BY A CERTIFIED ELECTRICIAN
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Possible cause
 ON/OFF-switch damaged
 Saw unplugged
 Overload tripped
 Fuse blown or circuit breaker
tripped
 Cord damaged
 Exerting too much pressure to
the sanding abrasive
 Abrasive too coarse-grained
 Abrasive too fine-grained
 Abrasive is dirty from oil
 Too much pressure
TROUBLE SHOOTING
Solution
 Check the switch
 Check all power connections
 Allow motor to cool and reset
by pushing off switch
 Change fuse or reset circuit
breake
 Change cable
 Exert less pressure on the work
piece
 Use less coarsed abrasive
 Use more coarsed abrasive
 Change abrasive
 Reduce pressure
24
SM 100

Advertenties

Inhoudsopgave
loading

Inhoudsopgave