Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly
A
M8*1.25*8T
D16*D8.5*1.2T
Seat
Fix the seat (12) onto the seat support stem (67) as per the drawing above and fix the seat support
stem (67) onto the seat post (4) with flat washer (19) and knob (51).
The seat (12) can be adjusted according to your personal need by loosing the knob (51) –
see the above small drawing "backward" / "forward".
Then, loose the adjustable knob (15) on the main frame and slide the seat post (4) onto the rear
stem of the main frame and secure with the knob (15) in a proper height.
The seat should be adjusted up and down, backward and frontward to fit users.
How to use the knob (15):
The seat support tube can be fixed at various heights by loosing and pulling out the knob (15),
adjusting the support tube to the desired height and then fix the knob (15) again properly.
The seating height is correct when the knee is slightly bent with the pedal vertically downwards
and the foot parallel to the floor.
B
C
32
Advertenties
Hoofdstukken
Inhoudsopgave
