Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OVERVIEW
1
Display
On/off switch
2
3
Evaporator compartment
Water tank
4
5
Disc stack
Water basin
6
PUTTING INTO OPERATION
01
07
Attention! Make sure that the appliance is switched off and the
power plug is disconnected.
Unpack the appliance and set it up. Lift the appliance slightly on the right sight
01
and move the appliance with the transportation wheels 11 to the desired place.
02
Open the evaporator compartment 3 and remove the water tank 4.
Open the water tank 4 and fill up to the MAX marker with water.
03
Close the water tank 4 securely.
04
Insert the water tank 4 into the water basin 6 and close the evaporator
05
compartment 3.
06
The display 1 can be adjusted to three positions.
07
The power cable can be adjusted to the desired length by winding it up in
the cable compartment 8.
Attention! The coupling of the mains cable must be plugged firmly into the
device! Please remove the protective foil for battery and remote control.
Connect the power plug and switch on the appliance at
the on/off switch 2 or with the remote control 10.
ATTENTION! It may take about a minute for the device to
start and for the "Fill Tank" indicator in red or yellow to be ex-
tinguished. A gurgling sound may be heard, but this does not represent a quality
defect.
Description of UVC lamp
The air washer features a built-in UVC lamp 7. The UVC lamp is designed for a
hygienically flawless operation of the air washer and prevents the formation of
germs and bacteria in the water. It is active for 4 hours a day.
15
GB
7
UVC lamp
Cable compartment
8
9
Hygiene Disc (pre-assembled)
10 Remote Control
11 Transportation wheels
ON/OFF
Set fan
stage
Advertenties
Hoofdstukken
Inhoudsopgave
