4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
20°C/5-20°C.
TEMPERATURE SETTING
A: POWER
D: SCREEN
G: ZONE SELECT
POWER ON/OFF CONTROL
When the appliance is plugged in to a power outlet, it powers on automatically.
Touch the power mark and hold for 10 seconds to turn off (or turn on) the appliance.
No matter it is under a locked or unlocked condition, you can turn off the appliance by touching the power
mark and holding for 10 seconds.
When you touch the power mark once, the backlight lamps of the keys will go out. Pressing any key will
light the display screen.
Warning: To avoid damaging the compressor, please do not turn on the appliance again within
5 minutes after you turn it off.
UNLOCKING THE CONTROL PANEL
Touch the lock mark and hold for 3 seconds. When unlocked a buzz sound will be heard.
Under the locked condition, the control panel will not react to any touching order for lighting On/Off and
Temperature setting.
INTERIOR LIGHTING ON/OFF CONTROL
Under the unlocked condition, touch the lighting mark to turn on (or turn off) the interior cool LED lighting.
The lighting will stay on until it is manually turned off.
The illumination of the appliance employs a two-stage loop control. The illumination will be 100% bright
when you touch the lightning mark for the first time. The brightness will switch to 50% when you touch
the mark for the second time. And the illumination lamps will all go out for the third time when you touch
the key. The control is in loop for the subsequent operation.
B: LIGHTING
E: TEMP. Plus
C: LOCK / UNLOCK
F: TEMP. Minus
57