Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9012444 Gemino 30 Carbon Comfort
Cleaning the brakes
Clean the brake blocks and brake springs
regularly.
Cleaning the basket
The basket can be removed and washed
separately. Machine wash 60°, hand wash 40°
or disinfection.
To disinfect; use approved chemical
disinfectant. Do not use heat disinfection.
Conditions that could damage the
rollator
The rollator should not be used at
temperatures below -35 °C or above 60 °C. No
specific requirements are made in connection
with humidity or air pressure. No further
requirements are made regarding storage
conditions.
Screws and nuts
Screws and nuts can become loose over
time. Therefore, remember to check and if
necessary retighten all screws and nuts on a
regular basis. A thread-locking product, such
as Loctite Blue No. 243, may be used.
If self-locking nuts have been removed they
lose some of their locking ability and should
be replaced.
Hygiene measures when being
re-used:
Prior to the rollator being re-used, it must be
carefully prepared. All surfaces which come
into contact with the user must be treated
with a disinfection spray.
To do this, you must use a disinfectant as
authorised/recommended in your country, for
rapid alcohol-based disinfection for medical
products and medical devices, which must be
disinfected quickly.
Please be aware of the manufacturer's
instructions for the disinfectant you are using.
In general, a complete disinfection cannot
be guaranteed on seams. We therefore
recommend that you dispose of seat
and back slings to avoid micro-bacterial
contamination with active agents according
to your local infection protection law.
Regular inspection
• Check that the brakes function correctly.
Adjust if necessary.
• Check that the wheels and the seat are
in good condition and that they have not
been damaged.
• Ensure that the rollator is clean and that all
moving parts function correctly.
• Check and if necessary adjust all screwed
connections.
Repairs
Apart from small repairs to paintwork, the
replacement of wheels and the adjustment
of the brakes, all repairs must be undertaken
by qualified personnel at the supplier in your
municipality or at the technical aids centre.
For information about repairs and servicing,
contact the technical aids centre in your
county.
Storage
Conditions for safe storage
• Products should be stored in a dry place;
between 20 – 75% Relative Humidity.
• Protect from direct sunlight and dust for
long periods.
• Away from direct heat; storage temperature
must be between -20 – 65°C (-4 – 149°F).
• The rollator should be stored in an upright
position.
• Do not stack anything on top of the
packaged products when the "do not
stack" mark on the packaging is shown.
• Product should never be stored externally
and subject to the elements.
Transport
Fold the rollator before transport. It should be
lifted and carried using the lifting handles.
Never lift the rollator by the brake cables or
the seat strap.
Technical specifications
Areas of application
The rollator is intended for both indoor and
outdoor use on a flat and firm surface.
It has been developed for individuals with
reduced muscle strength, reduced movement,
reduced mobility and reduced stability.
The expected life time is 10 years.
Disposal / Recycling of
Materials
In the following section, there is a description
of the materials used on the rollator, in view
of the disposal or recycling of the rollator and
its packaging. There may also be special local
regulations in force with regard to disposal or
recycling, these must be taken into account
when disposing of your rollator. (This can
include the cleaning or decontamination of
the rollator prior to disposal).
Aluminium: cross braces , pushhandles
Carbon fiber: Side Frame tubes
Steel: Fixing points, axles.
Plastic: Wheels, handles, tube stoppers,
castors and tyres.
Packaging: cardboard.
Upholstery: Polyester fabric with PVC
coating.
Disposal or recycling should be done through
a licensed agent or authorized place of
disposal. Please contact your local waste
disposal company for details relating to
the disposal of carbon fiber components.
Alternatively, your rollator may be returned to
your dealer for disposal.
English
CE labelling
As the manufacturer, SUNRISE
MEDICAL, declares that this product
conforms to the Medical Device
Regulation (2017/745).
UKCA Labelling
As the manufacturer, SUNRISE
MEDICAL, declares that this product
conforms to the UK Medical Devices
Regulation 2002 No. 618.
Notice to the user and/or patient: Any
serious incident that has occurred in relation
to the device should be reported to the
manufacturer and the competent authority of
the Member State in which the user and/or
patient is established.
B4Me special adaptations
Sunrise Medical strongly recommends that
in order to ensure that your B4Me product
operates, and performs as intended by
the manufacturer; all the user information
supplied with your B4Me product is read and
understood, before the product is first used.
Sunrise Medical also recommends that
the user information is not discarded after
reading it, but it is kept safely stored for future
reference.
Medical Device Combinations
It may be possible to combine this Medical
device with one or more other Medical
Device or other product. Information on
which combinations are possible can be
found at www.Sunrisemedical.co.uk. All
combinations listed have been validated to
meet the General Safety and Performance
Requirements, Annex I Nr. 14.1 of the Medical
Device Regulation 2017/745.
Guidance on the combination, such as
mounting, can be found at
www.SunriseMedical.co.uk.
21
Advertenties
Hoofdstukken
Inhoudsopgave
