Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only be appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an electric
specialist. Due to its design, the machine needs a minimum of care and
maintenance. However, the following points always have to be observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the machine.
In case of failure, a repair has to be carried out by an authorised service
workshop.
Environmental Protection
Raw Material Recycling instead of Waste Disposal
In order to avoid damages on transportation, the tool has to be delivered in solid
packaging. Packaging as well as unit and accessories are made of recyclable
materials and can be disposed accordingly.
The tool's plastics components are marked according to their material, which makes
it possible to remove environmental friendly and differentiated because of available
collection facilities.
Noise Emission / Vibration
The indication of noise emission is measured according to EN 62841-2-10. The
level of acoustic pressure on the work place could exceed 85 dB (A); in this case
protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 62841-2-10.
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of the European Directive 2012/19/EU on waste
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
13
Advertenties
Inhoudsopgave
