Replacing The Glass - Dovre BOLD 300 Gebruiksaanwijzing En Installatievoorschriften
Verberg thumbnails
Zie ook voor BOLD 300:
- Installatievoorschrift en gebruiksaanwijzing (194 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Open the door. The locking cam (2) is now freely
accessible; see next figure.
2. Unscrew the two screws (1) with which the lock-
ing cam is attached.
3. By removing the packing plate (3) behind the lock-
ing cam (2), the door closes more tightly. If the
door closes too tightly then insert an additional
packing plate behind the locking cam.
4. Tighten the two screws and check the closing of
the door once again.
3
2
1
Replacing the glass
If the glass in the appliance is broken or
cracked, it must be replaced before the stove
is used again.
Proceed as follows:
1. Unscrew the four glass fixings with parts (3) and
(4) and remove the glass (2), see following figure.
2. Check the glass seal and, if necessary, fit a new
sealing rope.
3. Place the new glass in the grove and tighten the
glass fixings.
16
09-20021-094
4
3
2
1
Subject to change because of technical improvements.
09-20021-098
Advertenties
Hoofdstukken
Inhoudsopgave
