Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.
Instructions for use
Important:
Check that the pool pump is circulating the water with an adequate water flow.
6.1. Initial startup of the heat pump
1. Checks to be performed before starting the heat pump
• The pool hose connections must be tight,
• The unit must be standing upright, be stable and be on a completely level surface.
• The power supply cable must not be exposed to sharp or hot objects
2. Additional checks must be performed by a qualified technician:
• The function of all safety components must be checked.
• Check that all metal elements are correctly earthed.
• The power connection and fitting of the electric power cable must be checked
Important:
Incorrect installation can cause overheating and will void the warranty.
3. Starting and Stopping the heat pump
Turn on the filter pump, check for water leaks and check the water flow of
the swimming pool.
As shown in the pictures to the right: when the switch is in the "OFF" posi-
tion, turn it to the "ON" position to start the heat pump. Turn it back to the
"OFF" position to stop the heat pump.
4. Set the water temperature
As shown in the picture to the right, you can set the desired water temper-
ature in intervals from 0°c to 40°c, by turning the temperature adjustment
knob.
• Turn clockwise = Decrease the temperature setting
• Turn anticlockwise = Increase the temperature setting
74
MV-1086-11-2018 . © All rights reserved Swim & Fun Scandinavia ApS
UK
Advertenties
Hoofdstukken
Inhoudsopgave
