Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
e. Auto Fade
1) Individual Channel Auto Fade
1. Press the Function key (#7), press the ▼ key (#15) 4 times ("AUTO FADE..." selected) and enter:
AUTO
FADE
CH
1------> 22%
down.
2. Use the numeric keypad (#11) or the ▲/▼ keys (#15 & 16) to select the auto fade channel.
Press Enter (#14) ; the cursor will move to the time setting:
AUTO
FADE
CH
1------> 22%
3. Press the ▲/▼ keys (#15 & 16) to select the fade speed (21 possibilities between 0.1sec and 1min).
2) Grouped Channels Auto Fade
1. Press the Function key (#7), press the ▼ key (#15) 4 times ("AUTO FADE..." selected) and enter:
AUTO
FADE
CH
1------> 22%
2. Select the desired starting channel by means of the numeric keypad (#11) or the ▲/▼ keys (#15 & 16), then
press the Range selection key (#13):
AUTO
FADE
CH
1--
3. Select the range by means of the numeric keypad (#11) or the ▲/▼ keys (#15 & 16), then press Enter (#14) ;
the cursor will move to the time setting:
AUTO
FADE
CH
1------> 22%
4. Press the ▲/▼ keys (#15 & 16) to select the fade speed (21 possibilities between 0.1sec and 1min).
Auto Fade speed and Chase speed are separate systems. Consequently, different speeds are allowed.
7. Cleaning and Maintenance
The following points have to be considered during inspection:
1. All screws for installing the devices or parts of the device have to be screwed down tight and must not be corroded.
2. The housing and connections should not be modified or tampered with.
3. The electric power supply cables must be undamaged. Have the device installed by a qualified technician.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
6. Have a qualified technician maintain this device. Contact your dealer for spare parts if necessary.
8. Technical Specifications
Power Supply
DMX signal input/output
DMX Signal Connector
Audio input
Dimensions
Weight
CE certificate
The information in this manual is subject to change without prior notice.
LPTJUNIOR
Channel 1 is now in Auto Fade mode ; the degree of fading is determined
9sec
by the master fader (#17). The fade value (%) is constantly going up and
9sec
9sec
9sec
2-> 22%
9sec
15Vdc / 1A
DMX512 / 1990
XLR 5-pin (IN male ; OUT female)
Line in, max. 100mV (-10dB)
268 x 132 x 45mm
3kg
ET87S-09-058
6
VELLEMAN
Advertenties
Inhoudsopgave
