Download Inhoudsopgave Inhoud Print deze pagina

System Setting Menu; Information Menus; Information Texts And Error Messages; Information Texts - murprotec CTA Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 16

4.9. System setting menu

This menu is for adjusting the screen's contrast and brightness.
Press on the key
Use the arrows
Use the arrows
Adjustment range :
- Contrast from 20 to 50
- Brightness from 0 to 10

5. INFORMATION MENUS

These menus are used solely to notify the services about the operation of your appliance.
These menus are accessed by pressing on the lower arrow
Press
to quit.

6. INFORMATION TEXTS AND ERROR MESSAGES

6.1. Information texts

This offers an overview of how the appliance operates. See § 4.1.1 for further details about the automatic mode.
Text
Increased flow
Reduced flow
Normal flow
Minimum flow
Reduced temperature
Heat wave : minimum
Heat wave : normal
Heat wave : resumption
Heat wave : ventilation
Air T° too high or
Heat wave : off
Air T° too low
Temporary mode
Rapid mode
Absent mode
New filter?
Daytime /night time
manual mode
46
to enter the menu.
and
to select the screen's contrast, or brightness and press
and
to vary the value and press
Explanation
The flow increases to reach maximum flow when the heating is on low
The flow decreases to keep energy consumption to a bare minimum
The flow is the general airflow because the air temperature is acceptable
The flow is at a minimum when the temperature is very high or very low
The temperature required is reduced by 2°C during the night time and in winter
When it is very hot, the flow is at a minimum so as not to blow air that is too hot
It is hot and the flow continues to be the general airflow because the air temperature is
acceptable
It is very hot and the appliance restarts in the early evening so as to bring in the cooler air
from outside
It is hot and the appliance's flow increases to ventilate the house at night
The temperature is too high inside the appliance
The temperature is negative inside the appliance.
Flow maintained for a period of time, to be defined in the flow menu (see § 4.1.2)
Maximum Flow for 1 hour (see § 4.1.3)
Temperature adjusted when you are away from the house (see § 4.1.4)
Question asked when the cover is opened. Answer YES only when you have put in a new filter
and clean the installation (see § 7.3)
This text is displayed when a constant day and night flow is selected (see § 4.2.2 and 4.2.3)
to confirm.
to confirm or
to quit.
or the upper arrow
when the main screen is displayed.

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor murprotec CTA

Deze handleiding is ook geschikt voor:

Cta 2

Inhoudsopgave