Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
13.1 Control panel and display
1 Change from °C to °F, as well as display of the current temperature inside the wine bottle
cooler
2 Increase the temperature
3 Display
4 Reduce the temperature
5 On/ standby button
6 LED
13.2 Operation of the bottle cooler
Connect the adapter plug with the device, then insert the plug into the socket.
Press the On / standby button.
Set your desired temperature.
Place a suitable bottle (less than 90 mm in diameter) in the device. The device starts to cool
down.
LED:
The LED flashes until the set temperature is reached. After that it is constantly illuminated.
As soon as the temperature deviates by more as 3 ° C, the display flashes again.
If you press the ° C / ° F button for a long time, the temperature in the interior of the bottle
cooler is displayed for a few seconds.
The cooling power of the device depends on various factors:
The ambient temperature:
The maximum achievable cooling power depends, among other things, on the outside
temperature. Rapid cooling is possible at a lower ambient temperature. If the ambient
temperature is very high, cooling may need more time.
The starting temperature of the contents of the bottle:
A pre-cooled bottle content is immediately kept cool. Bottles with a warmer content need
more time to reach the desired drinking temperature.
Please note
► Ambient temperature below 16°C or above 32°C will hinder the performance of the
appliance.
14 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
25
Advertenties
Inhoudsopgave
