Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Temperature
Security
Technical Data for Headset Connections
Microphone current consumption
Microphone sensitivity
Loudspeaker impedance
Loudspeaker sensitivity at 1 kHz
Sound level threshold
Initial Commissioning
1.
Mount the device base (2 different tilt angles) → A1
Connect the telephone → A2
2.
The Message key flashes. The company logo is first shown on the
display for 2 - 3 minutes, followed by information on the progress of
provisioning.
The IP address of the phone is shown at the top right of the display.
3.
Write down the IP address.
Note: The description applies from firmware
version 2.4.
Note: During initial commissioning with
provisioning (e.g. on a COMtrexx), the phone
starts up ready for use with the start screen.
Otherwise, the telephone waits for further
entries.
Further information – also for commissioning
without provisioning – can be found in the
complete help/operating instructions: https://
bit.ly/4cdpDq4
Environmental notices
To protect the environment, please make sure that the packaging materials
are properly disposed of.
If the Auerswald device is taken out of use (retired), make sure that it is
properly disposed of (it must not be disposed of with normal household
waste).
Consult your local governmental authorities for information about how to
dispose of the device in a proper and environmentally safe way. If you would
like us to handle disposal, please send the device to us, at Auerswald GmbH
& Co. KG.
Declaration of conformity
Auerswald GmbH & Co. KG declares: This product complies with the basic health,
safety and environmental requirements in all relevant European directives. The
Declaration of conformity can be found at: www.auerswald.de/en/start/support/
products. Select the product there. You can then download the Declaration of
Conformity under "Documentations".
Operation: 0 to 40°C, storage: -30 to +70°C, non-
condensing
CE
max. 0.5 mA
-43 dB
100 Ohms
19.5 +/- 3 dBPa/V
24 dBPa
Advertenties
Inhoudsopgave
