Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
HEART RATE
200
180
160
140
120
100
80
20
25
30
35
40
This stage should last for a minimum of 12
minutes though most people start at about 15-20
minutes
The cool down phase
This stage is to let your Cardiovascular System
and muscles wind down. This is a repeat of
the warm up exercise e.g. reduce your tempo,
continue for approximately 5 minutes. The
stretching exercises should now be repeated,
again remembering not to force or jerk your
muscles into the stretch.
As you get fitter you may need to train longer and
harder. It is advisable to train at least three times a
week, and if possible space your workouts evenly
throughout the week.
Muscle toning
To tone muscle while on your fitness trainer you
will need to have the resistance set quite high.
This will put more strain on our leg muscles and
may mean you cannot train for as long as you
would like. If you are also trying to improve your
fitness you need to alter your training program.
You should train as normal during the warm up
and cool down phases, but towards the end of
the exercise phase you should increase resistance
making your legs work harder. You will have to
reduce your speed to keep your heart rate in the
target zone.
Weight loss
The important factor here is the amount of effort
you put in. The harder and longer you work the
more calories you will burn. Effectively this is
the same as if you were training to improve your
fitness, the difference is the goal.
Use
Adjusting the support feet
The equipment is equipped with 4 support feet. If
the equipment is not stable, the support feet can
be adjusted.
14
TARGET ZONE
45
50
55
60
65
70
75
- Turn the support feet as required to put the
equipment in a stable position.
- Tighten the lock-nuts to lock the support feet.
MAXIMUM
85 %
‼ NOTE
70 %
•
The machine is the most stable when all
COOL DOWN
support feet are turned fully in. Therefore
AGE
start to level the machine by turning all
support feet fully in, before turning out the
required support feet to stable the machine.
Adjusting the horizontal seat position
The horizontal seat position can be adjusted by
setting the seat to the required position.
- Loosen the seat adjustment knob.
- Move the seat to the required position.
- Tighten the seat adjustment knob.
Adjusting the vertical seat position
The vertical seat position can be adjusted by
setting the seat tube to the required position.
With the leg almost straight, the arch of the foot
must touch the pedal at its lowermost point.
- Loosen the seat tube adjustment knob.
- Move the seat tube to the required position.
- Tighten the seat tube adjustment knob.
Adjusting the handlebar
The handlebar can be adjusted according to the
height and the exercise position of the user.
- Loosen the handlebar adjustment knob.
- Move the handlebar to the required position.
- Tighten the handlebar adjustment knob.
Adjusting resistance (Fig. F-1)
To increase or decrease resistance, turn the
adjustment knob at the top of the handlebar
support tube clockwise (+ direction) to increase
resistance and Distanceer-clockwise (- direction) to
decrease resistance.
Emergency break knob (Fig. F-2)
To apply the brake, press down on the brake
tension
knob.
Advertenties
Hoofdstukken
Inhoudsopgave
