Advertenties
Beschikbare talen
Beschikbare talen
2. Detach the filter cover and filter plate and remove the debris from the compartment. It
is recommended to clean the filter cover net and draining filter plate with splashing water.
If brushing is deemed necessary, use only a soft brush to clean it carefully and gently to
avoid damages.
3. After cleaning, make sure that both draining filter plate and filter cover are in place and
the body top cover is correctly installed and secured by the side clips.
CAUTION!
Replace a damaged filter cover immediately with a new one before the next operation.
- Replace a damaged filter plate immediately with a new one before the next operation
- Replace a damaged flap immediately with a new one before the next operation.
-
Flap replacement
MAINTENANCE & STORAGE
NOTE:
1. Be sure to clean and dry the areas around the charging port and water sensors after
every use to avoid the forming of stains (byproduct of a natural chemical reaction
between electric current and water). Otherwise, the stains can be removed by light
scrubbing with a cotton bud soaked with juice of lemon or vinegar.
2. Battery discharges on its own during storage. Make sure to charge the robot to about
30% to 50% of the battery capacity before it is stored.
3. You must recharge the battery at least once every three months when it is not in use.
Unplug the external adaptor from the socket and the charging plug from the external
adaptor and robot.
Detach accessories from the robot. If necessary, rinse the robot and accessories with
fresh water. DO NOT use detergent.
Be sure to drain the water from the robot before storage.
Use a damp cloth to clean and dry the robot and its accessories.
Store them in a well-ventilated area away from sunlight, heat, ignition sources, pool
chemicals and from children. Ambient temperature for storage should be 10 C – 25 C
(50 F – 77 F). NOTE: A higher storage temperature may reduce the battery life.
16
Advertenties
