Advertenties
Beschikbare talen
Beschikbare talen
2. With the robot switched off, submerge it in the pool and gently shake it a few times to
facilitate discharge of air. Excess air trapped in the body could result in erratic
behavior of the swivel head (i.e. spinning repeatedly in the pool for a few minutes).
Power indicator light
3. Slide the power switch to "ON" (while the robot is still submerged) – the indicator light
will turn on and activate the motor automatically (water level covering the sensors at the
top of the swivel head). Let the robot sink to the pool floor and observe its first forward
and reversed movements across the pool bottom. If it runs along the pool wall instead of
perpendicularly, retrieve it and redeploy it while making sure its front/back is facing the
pool wall.
Power indicator light starts to blink when 10 minutes of usage remains.
Power indicator light:
No light - Power off / no power
Light - Power on
Blinking light - Battery power will be exhausted within 10 minutes.
NOTE:
Refrain from making any physical contact with both water sensors.
-
4. To retrieve the robot from the pool, attach the hook to a telescopic pole (not provided)
and use it to retrieve the float, if you are unable to retrieve with your hands.
(For EU & USA only)
(For Australia and New Zealand only)
(Green)
14
Advertenties
