Safety
General safety instructions
This device conforms to the relevant safety regulations. For safe handling of this
unit, please observe the following safety instructions:
- However, incorrect handling may lead to injury and damage.
- Before using this unit for the first time, check it for visible outer damages on
the housing, connection cable and plug. Do not operate a damaged unit.
- If the connection cable is damaged, it must be replaced by the manufacturer,
the after-sales service or a similarly qualified person in order to prevent
danger.
- Repairs may be carried out only by an expert or by Graef after-sales service.
Incorrect repairs may cause considerable hazards for the user. In addition,
any claim under guarantee is forfeited.
- Defective parts must be replaced by original spare parts only. It is only with
these parts that the safety requirements are met.
- This unit must not be used by children.
- Keep the unit and its connection cable away from children.
- This unit may be used by persons with reduced physical, sensory or mental
abilities or deficiencies in experience and knowledge, if they are supervised
or have been instructed in the safe use of the unit, and in addition understand
the resulting dangers.
- Children must not play with this unit.
- The unit is not intended to be used with an external timer or a separate
remove control.
- Always disconnect the connection cable by using plug; do not pull the
connecting cable.
- Be careful not to let the power cord hang freely, this could cause the fall of
the unit.
- Packaging materials must not be used for playing. There is a danger of
suffocation.
- In the absence of supervision and prior to assembly, disassembly or during
cleaning, always disconnect the unit from the mains.
- After a continuous operation of 10 minutes, let the motor cool down for
an hour.
- The unit must not be used without the end-piece holder, unless the size and
shape of the slicing material does not allow its use.
DE
EN
FR
NL
IT
ES
DK
PL
21