Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
Switching on and off
Switching on:
♦
Push the ON/OFF switch
the appliance on .
The LED work light
ance is switched on to light up the working area
in low light conditions .
NOTE
►
The LED work light
without dust extraction unit
Switching off:
♦
Push the ON/OFF switch
switch the appliance off .
Select oscillation speed
♦
Use the speed adjustment wheel
required oscillation speed .
Stage 1: low oscillation speed
Stage 6: high oscillation speed
NOTE
►
The required speed depends on the material
being worked and on the working conditions
and can be determined through practical
tests .
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
■
Do not use any sharp objects to clean the ap-
pliance . Never permit liquids to enter inside the
appliance . This can damage the appliance .
■
Clean the appliance regularly, preferably imme-
diately after completion of the work .
■
Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■
A vacuum cleaner is required for thorough
cleaning of the appliance .
■
Ventilation openings must never be obstructed .
PAMFW 12 B2
forwards to switch
lights up when the appli-
may only be used
.
backwards to
to set the
■
Remove any adhering swarf with a brush .
■
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
climate is cool and dry .
NOTE
►
Replacement parts not listed (such as carbon
brushes, switches and replacement batteries)
can be ordered via our service hotline .
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .
Warranty conditions
The validity period of the warranty starts from the
date of purchase . Please keep your original receipt
in a safe place . This document will be required as
proof of purchase .
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion . This warranty service is depend-
ent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence .
If the defect is covered by the warranty, your product
will either be repaired or replaced by us . The repair
or replacement of a product does not signify the
beginning of a new warranty period .
GB │ IE
│
21
■
Advertenties
Hoofdstukken
Inhoudsopgave
