Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Application:
–
removal of material residues, such as tile adhe-
sive, when replacing damaged tiles
–
milling of grout on wall and floor tiles .
Scraper
Materials:
Mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application:
–
removal of material residues, such as carpet
glue residue on the floor .
Sanding plate
Materials:
Wood and metal (sanding sheets
wood*, metal*
*depending on the sanding sheet
Application:
–
sanding up to edges and hard to reach areas .
■
20
│
GB │ IE
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet
sanding plate
Changing tools
NOTE
►
■
♦
If necessary, remove an already fitted tool .
To do this, raise the tool release lever
♦
Fit the tool (e .g . the plunge saw blade
the tool fitting .
NOTE
►
♦
Fix the tool in place by pushing the tool release
lever
■
Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury .
supplied),
.
If you wish to use the dust collection, it must be
connected before fitting the tool (see section
"Connecting a dust extraction device") .
WARNING! RISK OF INJURY!
Always remove the battery before working on
the power tool .
You can fit the tools in any snap position on
the tool fitting .
back down again .
centrally on the
.
) onto
PAMFW 12 B2
Advertenties
Hoofdstukken
Inhoudsopgave
