Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation Guide
1. Installation Steps
EN
User Guide can be downloaded from: heating.danfoss.com.
1. Installation must be done by an authorised
electrician.
2. The room thermostat should be installed at approx.
1.5 m above oor and where the e ects of sunlight,
draught or other heat sources (eg. TV's) are avoided,
see g. 1 on page 44.
3. First loosen lower retaining screw and carefully
remove back plate, see g. 2 on page 44.
4. Mount back plate direct to wall or on wall box and
wire according to application, see g 3 on page 44 &
wiring diagram on the next page.
5. Locate hooks at top of front part into top of back
plate and lower into position and tighten retaining
screw.
4
RET2001OT - V2
AN30483479654801-010102 Danfoss Climate Solutions
Advertenties
Inhoudsopgave
