Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
• The terminal of the battery that is not connected
• After the charging process, disconnect the
Connection:
• Class II device.
• This machine is fuse-protected.
Maintenance:
• If the power supply cable is damaged, it must
• Service should be performed by a qualified
• Warning! Always remove the power plug
• If the internal fuse is blown, it must be replaced
• Regularly take off the cover and remove
• Under no circumstances should solvents or
10
TCB 60 / 90 / 120
to the car frame must be connected first. The
other connection must be made on the car
frame, far from the battery and the fuel line.
The battery charger must be connected to the
power supply network.
battery charger from the power supply
network and remove the connector from the
car frame and then the connector from the
battery, in this order.
only be replaced by a cable specified or
supplied by the manufacturer or its after-sales
service.
person.
from the wall socket before carrying out any
work on the device.
by the manufacturer, its after-sales service or
an equally qualified person.
dust with an air gun. Take the opportunity to
have a qualified person check the electrical
connections with an insulated tool.
other aggressive cleaning agents be used.
EN
Advertenties
Inhoudsopgave
