Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The IKA
®
MIDI MR 1 digital and MAXI MR 1 digital is
a magnetic stirrer without heating function. The devices are
suitable for stirring and mixing liquid substances up to 50
liter (MIDI MR1 digital) and 150 liters (MAXI MR1 digi-
tal). The built-in stirring drive permits the stirring of sub-
stances with the aid of a magnetic stirring bar in the vessel.
The mixing intensity is dependent on the motor speed and
the size of the magnetic bar.
• Use:
- for stirring and mixing liquids.
Intend use: Tabletop device
• Range of use (indoor use only):
- Laboratories
- Schools
- Pharmacies
- Universities
• Unpacking:
- Please unpack the device carefully.
- In the case of any damage a detailed report must be
sent immediately (post, rail or forwarder).
Check whether the voltage specified on the type plate
matches the mains voltage available.
The power socket used must be
earthed (protective earthing).
If above conditions are met, the device is ready for opera-
tion after plugging in the mains plug.
If these conditions are not met, safe operation is not guar-
anteed and the device could be damaged.
Observe the ambient conditions (temperature, humidity,
etc.) listed under "Technical Data".
The device can be operated in two modes, "Continuous
mode" or "Timer mode":
Fig. 3
Correct use
This device is suitable for use in all areas except:
- Residential areas.
- Areas that are connected directly to a low-voltage supply
The safety of the user cannot be guaranteed:
- If the device is operated with accessories that are not sup-
- If the device is operated improperly or in contrary to the
- If the device or the printed circuit board are modified by
Unpacking
• Delivery scope:
Commissioning
Continuous mode:
To switch the device on, turn the "On/Off" and "Timer"
The device is now running in "Continuous mode".
To switch the device off, turn the "On/Off" and "Timer"
Timer mode:
To switch the device on, turn the "On/Off" and "Timer"
The running time can be adjusted to any value between
After the selected time period has elapsed, the switch
The time period selected can be adjusted at any time.
Setting the motor speed:
Set the motor speed by turning the "Speed" rotary knob
C
B
network that also supplies residential areas.
plied or recommended by IKA
IKA
®
specifications.
third parties.
- IKA
®
MIDI MR 1 digital or MAXI MR 1 digital ac-
cording to order
- Magnetic stirring bar
- Mains cable
- USB 2.0 cable A – B
- Operating instructions
- Warranty Card.
rotary knob (B, see Fig. 3) clockwise to the "1" position.
rotary knob (B) to "0" position.
rotary knob (B) clockwise after the " " position.
0 and 55 minutes.
will automatically return to the "0"position and the de-
vice will remain switched off.
(C, see Fig. 3). The motor speed can be set to between
0 to 1000 rpm for MIDI MR 1 digital and 0 to 600 for
MAXI MR1 digital.
®
.
13
Advertenties
Inhoudsopgave
