Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
HOOD TOUCH PUSHBUTTON PANEL
+
A
A
A
-->
+
A
A
A
-->
A
A
If the pushbutton panel is completely inactive, before contacting
the Technical assistance service, disconnect power temporarily to
the appliance (about 5"), possibly by acting on the main switch, to
restore normal operation. If this measure has no effect, contact the Techni-
cal assistance service.
CLEANING AND MAINTENANCE
ATTENTION!
For cleaning, never use a steam equipment.
Before cleaning the cooker, make sure that it is at room temperature.
Always clean the cooker after each use with a specific cleanser for pyroceram.
Do not use products containing:
- corrosive agents (soda, acids, ammoniac).
- abrasive agents (dusts or paste).
Do not wash the flaps in a dishwasher.
Do not use pointed or abrasive objects.
After cleaning, dry the appliance with a soft cloth.
Speed increase from 1 to...9 (up
to "P").
Speed "P": active only for a few mi-
nutes, then speed 9.
A: Hood operation automatic cycle
activation (A) according to plate
power.
Hood timer function.
Allows you to turn off the hood after
a set time
Automatic switch off: if all the bur-
ners are turned off, the hood stays
on for 5 minutes and then turns off
automatically
Carbon.Zeo filter alarm:
Maintenance after about 1500 hours
of use. The display shows "F".
To reset the alarm: press the
key for 5 seconds
To Activate the alarm:
With the hood off, press the hood di-
splay for 5 seconds. The activation of
the Carbon.Zeo filter alarm function
is given by the visualization of F + A
on the display
To turn off the alarm:
With the hood off, press the hood di-
splay for 5 seconds. The deactivation
of the Carbon.Zeo filter alarm fun-
ction is given by the visualization of
only F on the display
USEFUL CARE TIPS
Clean your glassceramic cooktop regularly, preferably every time you use it.
Avoid using abrasive sponges or scouring agents.
Harsh chemical cleaners like oven sprays or stain removers are also unsuitable, as
are bathroom or household cleaners.
Accidents happen ...
Do not allow the hot hob to come into contact with plastic, tin foil, sugar or
sugary food have fallen on the hot glass-ceramic cooktop. Please scrape it off
the hot surface as quickly as possible. If these substances melt, they can damage
the glass-ceramic cooktop.
Sparkling results in only three steps:
To thoroughly clean your glass-ceramic cooktop, first remove dirt and food with
a suitable metal scraper.
Once the glass-ceramic cooktop has cooled, put a few drops of a suitable clean-
er on it and rub it on with a paper towel or a clean cloth.
Then wipe the glass-ceramic cooktop with a damp cloth and dry it with a clean
cloth.
How do I identify a suitable glass-ceramic scraper?
•
Scraper made of metal (won't melt or catch fire)
•
Scraper easy to lock / to unlock
•
Blade is fixed precisely, it does not shift
•
Blade is unbroken, clean and stainless
•
Scraper certified by testing institute, if procurable (e.g. TÜV-GS seal)
•
User manual and safety instructions available
CLEANING OF INTERNAL SURFACES
Do not clean electrical parts, or parts related to the motor inside
the hood, with liquids or solvents.
For the internal metal parts, see the previous paragraph.
METAL ANTI-GREASE FILTERS
It is advised to frequently wash the metal filters (F) (at least once a month)
leaving them to soak in boiling water and cleaning solution for 1 hour, taking
care not to bend them.
Do not use corrosive, acid or alkaline detergents.
Rinse them well and wait for them to be completely dry before reassembling
them.
Washing in a dishwasher is permitted.
To extract and insert the metal anti-grease filters see the assembly instructions.
CARBON-ZEO FILTERS
In normal use conditions, we recommend regenerating the zeolite-carbon filter
every 18 months and replacing it after 3 years.
Remove the filter as described in the instructions.
Simply place it in a domestic oven at a temperature of 200°C for approximately 1
hour to regenerate it. Wait until the filter cools before reassembling it.
GREASE DRIP TRAY
It is advisable to clean the tray every 1 month.
Do not use corrosive, acid or alkaline detergents.
For more thorough cleaning, remove the oil collection tray (see figure) and wash
it with water and washing up liquid. Rinse it well and wait for it to be completely
dry before reassembling it.
25
Advertenties
Inhoudsopgave
