Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TFA_No. 30.1052_Anleitung
Digital professional thermometer with cable probe
• In the event of an alarm, the alarm symbol and HI or LO with the correspon-
ding symbol (upper or lower alarm limit) will be flashing. An alarm signal
sounds every 2 seconds (except when muted) and the red alarm light flashes.
• Press any button to stop the alarm sound and flashing light.
• If the alarm is active for more than one minute, the alarm is only triggered
once per minute. The alarm remains active until the temperature is no longer
higher/lower than the preset alarm limit and has not been manually stopped.
8. Battery replacement
• Change the batteries when the battery symbol appears on the display.
9. Troubleshooting
Problem
Solution
➜ Ensure the batteries' polarities are correct
No display
➜ Change the batteries
09.10.2023
12:30 Uhr
Seite 15
– 28 –
Digital professional thermometer with cable probe
➜ Check the position of the sensor
Incorrect indication
➜ Restart the instrument according to the manual
➜ Change the batteries
If your device fails to work despite these measures, please contact the retailer
where you purchased the product from for advice.
10. Waste disposal
This product and its packaging have been manufactured using high-grade mate-
rials and components which can be recycled and reused. This reduces waste
and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collec-
tion systems that have been set up.
– 29 –
Advertenties
Inhoudsopgave
