Advertenties
Beschikbare talen
Beschikbare talen
Using Spotify Tap
TM
Spotify Tap
allows you resume and change music
TM
directly from your Bluetooth speaker with the press of
a button.
If you have an iOS device:
Go to the App Store and download the Spotify app. You
will be able to create an account or log in if you already
have one.
If you have an Android device:
Go to the Google Play Store and download the Spotify
app. You will be able to create an account or log in if
you already have one.
First use
1. Make sure your device is paired via Bluetooth to your
VAPPEBY speakers.
2. Make sure the Spotify mobile app is open. This will
only be needed upon the first use.
3. Press the Power button (3) to start music. The LED
indicator should blink twice.
From now on, whenever you quickly press the Power
button (3), the music resumes anytime your device is
paired and in range.
Other settings:
Unpair Bluetooth devices
Set up a stereo pair
Enable/Disable the auto-
off function
Factory reset
Press and hold the Bluetooth pairing button (4) for ≥1.5 s. The speaker will
release the Bluetooth connection to the phone and start searching for another
device to pair with. The LED will change from steady light to flashing.
You can pair two identical VAPPEBY 20 gen3 speakers to create a stereo
experience. In this configuration, one speaker serves as the left channel and the
other serves as the right channel.
1. Factory reset both speakers
2. Both speakers automatically enter Bluetooth pairing mode (LED quick flash).
3. Press twice on the Bluetooth button (4) on one of the speakers (master) to
initiate stereo pairing (LED slow flash).
4. Successful pairing is confirmed by a system sound.
5. Pair the master speaker to your source device.
To disconnect a stereo pair, factory reset both speakers.
Move the switch (2) to position "20" to enable auto-off. The speaker will turn
off automatically after 20 minutes if no music is played. Move the switch (2) to
position "∞" to disable the auto-off function.
Press and hold the volume knob (5) for 5 seconds. A confirmation sound will be
played.
Changing music
Press the Power button (3) again to change what's
playing to a recommended track.
Play music from external source:
Connect a portable audio device to the AUDIO IN (7)
jack on the rear panel. The speaker automatically
detects the external input and disables Bluetooth
functionality. Use a 3.5mm 3-pole audio cable for this
feature.
Use speaker throughout the home:
VAPPEBY 20 has the possibility to be portable. ENEBY
battery pack is sold separately.
• To insert the battery, open the compartment lid (6)
and insert the battery in the correct position.
• The battery charges in the product when a mains
cord is connected and the speaker is turned on.
• When the battery is low, a red LED in the knob (5) will
flash. During charging, the red LED stays on without
flashing.
CAUTION:
Risk of explosion if battery is replaced by an incorrect
type.
Replace only with the same or equivalent type.
11
Advertenties
