Victron energy EasySolar 12 1600 70-16 230V MPPT 100 50 Handleiding pagina 4

Advertenties

Beschikbare talen

Ensure that the equipment is used under the correct ambient conditions. Never operate the

product in a wet or dusty environment. Ensure there is adequate free space for ventilation

around the product and check that the ventilation vents are not blocked.

Ensure that the required system voltage does not exceed the product's capacity.

Transport and Storage

Ensure that the mains power and battery cables have been disconnected before storing or

transporting the product.

No liability can be accepted for any transport damage if the equipment is shipped in non-

original packaging.

Store the product in a dry environment; the storage temperature must be between -40°C and

60°C.

Consult the battery manufacturer's manual in respect of transport, storage, charging,

recharging and disposal of the battery.

2. DESCRIPTION

2.1 General

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC

distribution in one enclosure.

The product is easy to install, with a minimum of wiring.

Solar charge controller: BlueSolar MPPT 100/50

Up to three strings of PV panels can be connected with three sets of MC4 (PV-ST01) PV

connectors.

Inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40

The MPPT charge controller and the MultiPlus inverter/charger share the DC battery cables

(included). The batteries can be charged with solar power (MPPT) and/or with AC power

(inverter/charger) from the utility grid or a genset.

AC distribution

The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A

and two 16A circuit breakers.

One 16A output is controlled by the AC input: it will switch on only when AC is available.

PowerAssist

Unique PowerAssist technology protects the utility or generator supply from being overloaded

by adding extra inverter power when needed.

Advertenties

Easysolar 24 1600 40-16 230v mppt 100 50