Victron energy EasySolar 12 1600 70-16 230V MPPT 100 50 Handleiding pagina 16

Advertenties

Beschikbare talen

5.2 Explanation of settings

Settings that are not self-explanatory are described briefly below. For further information,

please refer to the help files in the software configuration programs (see Section 5.3).

Inverter frequency

Output frequency if no AC is present at the input.

Adjustability: 50Hz; 60Hz

Input frequency range

Input frequency range accepted by the MultiPlus. The MultiPlus synchronises within this range

with the AC input frequency. The output frequency is then equal to the input frequency.

Adjustability: 45 – 65Hz; 45 – 55Hz; 55 – 65Hz

Input voltage range

Voltage range accepted by the MultiPlus. The MultiPlus synchronises within this range with

the AC input voltage. The output voltage is then equal to the input voltage.

Adjustability:

Lower limit: 180 - 230V

Upper limit: 230 - 270V

Inverter voltage

Output voltage of the MultiPlus in battery operation.

Adjustability: 210 – 245V

Search Mode (Applicable in stand-alone configuration only)

If search mode is 'on', the power consumption in no-load operation is decreased by approx.

70%. In this mode the Compact, when operating in inverter mode, is switched off in case of no

load or very low load and switches on every two seconds for a short period. If the output

current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut

down again.

The Search Mode can be set with a DIP switch.

The Search Mode 'shut down' and 'remain on' load levels can be set with VEConfigure.

The standard settings are:

Shut down: 40 Watt (linear load)

Turn on: 100 Watt (linear load)

Advertenties

Easysolar 24 1600 40-16 230v mppt 100 50