Advertenties
Beschikbare talen
Beschikbare talen
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing on the Market) Regulations 2008
and the Waste Batteries and Accumulators Regulations 2009: This product contains a
battery that cannot be disposed of as unsorted municipal waste in the United
Kingdom. See the product documentation for specific battery information. The battery
is marked with this symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see: www.recyclethis.info.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. Please read all the safety information carefully before
using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and the company shall not take any responsibilities.
Do not drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Power Supply
The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC61010-1 standard. Please refer to actual products and technical
specifications for detailed information.
The power source should meet limited power source or PS2 requirements according
to IEC 60950-1 OR ICE 62368-1 standard.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or
fire hazards caused by overload.
The battery charger is included in the package. The input voltage for the supplied
battery charger should meet the Limited Power Source (5 VDC, 2 A).
Battery
Improper use or replacement of the battery may result in explosion hazard. Replace
with the same or equivalent type only. Dispose of used batteries in conformance with
the instructions provided by the battery manufacturer.
The battery type is 18650 with the protection board, and the battery size should be
19 mm × 70 mm. The rated voltage and capacity are 3.6 VDC/3.35 Ah (12.06 Wh).
Make sure the battery temperature is between 0 °C to 45 °C (32 °F to 113 °F) when
charging.
For long-term storage of the battery, make sure it is fully charged every half year to
ensure the battery quality. Otherwise, damage may occur.
Do not charge other battery types with the supplied charger. Confirm there is no
flammable material within 2 m of the charger during charging.
The battery cannot be charged with external power source directly.
Confirm there is no flammable material within 2 m of the charger during charging.
DO NOT place the battery near heating or fire source. Avoid direct sunlight.
DO NOT place the battery in the reach of children.
DO NOT swallow the battery to avoid chemical burns.
The device cannot be charged. Please use the supplied charger to charge the
battery.
Maintenance
If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
Make sure the running environment meets the requirement of the device. The
operating temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the operating
humidity shall be from 5% to 95%.
Place the device in a dry and well-ventilated environment.
DO NOT expose the device to high electromagnetic radiation or dusty
environments.
DO NOT aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed
to the laser beam, or it may burn out.
Avoid equipment installation on vibratory surface or places subject to shock
(neglect may cause equipment damage).
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Laser
When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out. The laser radiation emitted
from the device can cause eye injuries, burning of skin or inflammable
substances. Before enabling the laser ranging function, make sure no
human or inflammable substances are in front of the laser lens. Do not place the
device where minors can fetch it.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District,
Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls
in various countries or regions, including without limitation, the United States,
European Union, United Kingdom and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal or compliance expert or local
government authorities for any necessary export license requirements if you intend to
transfer, export, re-export the thermal series products between different countries.
Informationen zur Einhaltung gesetzlicher Vorschriften und zur Sicherheit
Lesen Sie alle Informationen und Anweisungen in diesem Dokument sorgfältig, bevor
Sie das Gerät in Betrieb nehmen und bewahren Sie sie zum Nachschlagen auf.
Weitere Informationen und Anleitungen finden Sie auf unserer Website unter
www.hikmicrotech.com. Weitere Informationen finden Sie auch in anderen
Dokumenten (falls vorhanden), die dem Gerät beiliegen oder Sie können den QR-Code
112
Deutsch
Advertenties
