Set Up Current Day and Time
Hold time button
to select date, D1-D7 will show on the display which represents Monday-Sunday. Press button
to confirm, and then automatically enter hour setting. Press button
button
to save and then automatically enter minute setting. Press button
minute and then press
Set Up the 7 Days Timer
Hold the button
days timer setting mode.
D1 (Monday) will show on the display and then press
display. Press button
confirm; The 00 will show on the display, press
and then press
on and off.
Repeat the steps above to set the timer for D2 to D7 (Tuesday to Sunday). The display on fire will
show the time for turning on and off the heater as same as the time of last day. If you want to
change the time, press the button
If you don't want to set for a certain day, just set both start and end time as 00.
Hold 7 days timer button
will stop to flash.
The weekly timer will be set only when you finish the setting from Monday to Sunday completely.
During the setting process, the pause of more than 20 seconds will terminate the entire weekly
timer setting.
Open Window Detection
Open Window Detection is an innovative eco feature that detects a rapid drop in room temperature
caused by an open window. The warning word "oP" will be displayed on the appliance and the heater will
be turned off. If the room temperature rises or the remote control is operated manually, the heater will
return to its normal working state.
Adaptive Start Control
Learning from the previous heating cycle enables the appliance to judge the appropriate advance time to
turn on the heater to ensure that the set temperature is reached at the set time. For example, if your
timer is set to start at 18:00 and temperature is set to 23°C, the fire may for example come on at 17:30
to ensure the room is 23°C at 18:00.
Important Safety Information for Remote Control
1. Two AAA alkaline batteries are required for the remote control;
2. Use the thumb press and push the bar figure on the back cover down simultaneously, then take out the
cover and remove the battery or insert the battery, after this put the cover back to its body back;
3. This AAA alkaline battery (non-recharged) is not to be recharged;
4. Different types of batteries or new and used batteries are not to be mixed;
5. Batteries are to be inserted with the correct polarity;
6. Exhausted batteries are to be removed from the appliance and safely disposed of;
7. If the remote control is to be stored unused for a long period, the batteries should be removed;
8. The supply terminals are not to be short-circuited.
on the remote to enter date and time setting mode; Repeatedly press time button
to save.
on the remote until the 7 days timer indicator on the firebox flashes to enter 7
to set the time for turning on the heater and then press
to confirm. PLEASE NOTE: There is only one period each day for heating
to save all settings after you finish the setting for Sunday. The indicator
to set the time for turning off the heater
.
to set the hour, and press
to confirm; then 00 will show on the
again to set
to