Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.3 Remote Control
Icon
Title
STANDY BY
FLAME
TIMER
HEATING
TEMPERATURE
TIME
7 DAYS TIMER
Function
Press to turn on or turn off the flame effects
and
heater.
Repeatedly press to cycle through 3 flame
effects.
Repeatedly press to cycle through timer
options.
Select an amount of time for the appliance
to operate, and then automatically turn off.
Choose between 0.5, 1,
2, 3, 4, 5, 6, 7, 8, 9 hours.
Press to turn on/off the heater.
The heater can be run independently.
Press to select the temperature you want
the room to reach from the range of 16-
28℃
(60-82℉)and then 58℃ (99
℉),which will keep the heater on. Hold the
button to switch the unit
between ℃/℉.
Press to set the heating start and end time.
Press to turn on or off the 7 days timer for
heater.
Fireplace Response
The flame runs.
The current flame setting L1; L2; L3
shows on the display.
The flame runs.
The current flame setting L1; L2; L3
shows on the display.
The number 30, 1H, 2H, 3H, 4H, 5H,
6H, 7H, 8H, 9H, 0H
shows on the display.
The temperature shows on the
display and the heater indicator will
turn off after 10 seconds if the
flame effect is on.
The display of the appliance shows
the temperature.
16-28 in Celsius degree corresponds
to 60-82 in Fahrenheit degree.
There will be changes in number
while switching between ℃/℉.
The number shows on the display.
7 days timer and heater indicators are
both on.
Advertenties
Inhoudsopgave
