Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Studio Home Decor Sprayer
6. Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, plaster, facade paint, caustic solutions
and acidic coating substances. Flammable materials.
7. Preparation of the Coating Material
The Home Decor Sprayer allows you to spray unthinned or just slightly thinned paints,
enamels and varnishes. Detailed information is available in the technical data sheet of
the manufacturer ( Internet Download).
1. Stir the material up and put the required amount into the paint container.
Sprayed material
Glazes, wood preservatives, mordants
Chalk paints, paints containing solvents and water-soluble
paints, primers
2. If the convey capacity is too low, add 5 - 10 % dilution step-by-step until the convey
capacity fulfils your requirements.
8. Start-up
Before connecting to the mains supply, be sure that the supply voltage is identical with
the value given on the rating plate.
•
Unscrew the container from the spray gun.
•
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed
without almost any residue.
When spraying horizontal surfaces, turn suction tube forward. (Fig. 2 A)
When spraying objects overhead, turn suction tube back. (Fig. 2 B)
•
Set the container on a sheet of paper, pour in the prepared coating material and
screw the container tightly onto the spray gun.
•
Mount the air hose (Fig. 3, a + b). Insert the air hose firmly into the connection of the
unit and the gun handle. The position of the hose is not relevant.
•
Put the machine down only on a level, clean surface. Otherwise, the gun may suck in
dust, etc.
•
It is advisable to test spray cardboard or a similar material in order to determine the
material quantity and the spray pattern.
•
Press the ON/OFF switch at the device.
All manuals and user guides at all-guides.com
Thinning recommendation
GB
undiluted
dilute by 0 - 10 %
19
Advertenties
Hoofdstukken
Inhoudsopgave
