Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: If you are unable to close off a gas leak, then turn off the gas supply and contact
•
your sales outlet. Even a small leak can cause a fire.
Note: If, after several attempts, you are unable to light the barbecue, then contact your
•
sales outlet.
Note: Ensure that the control knobs are in the "OFF" position when you are not using
•
the equipment.
4.3 Lighting the barbecue
Check the general conditions of the burners (see 0). If you are in doubt about the
•
condition of the burners, then contact your sales outlet.
•
Ensure that the barbecue is placed on a level surface.
Keep the cooking area clean and free from petrol and/or other flammable and/or
•
inflammable substances, flammable gasses or flammable fumes.
Ensure that nothing is blocking the burners and ventilation.
•
Do not use aluminium foil in the enamel burner tray or around the flame distributors.
•
Ensure there is sufficient ventilation for the gas bottle.
•
WARNING:
Do not light the barbecue if you can smell gas!
•
Check the gas hose for cracks or wear and tear (see: GAS LEAK TEST).
•
Keep your face and body as far away from the barbecue as possible when lighting it.
•
4.4 Lighting the burners with an electronic igniter
Ensure that all knobs are in the "OFF" position.
•
Always open the lid before you light the barbecue.
•
Open the gas supply.
•
o NOTE: when opening the gas bottle, turn the valve SLOWLY two (2) whole turns to
get the right gas supply.
Press and turn one of the control knobs to the "FIIGFI" setting. You will hear a crackling
•
noise. It may be necessary to keep the igniter depressed for about 10 seconds.
Note: if the burner does not light after 10 seconds, turn the knob back to the "OFF" position
•
and wait 1 minute before you try again.
•
•
Repeat the above steps also for the other burners.
Note: On some models, as well as the control knob, a separate ignition knob also needs
•
to be pressed.
4.5 Lighting the burners with a match extender (if provided)
If the electronic igniter does not manage to light the burners, it is also possible to light the
burners with the aid of a match.
Put the match in the extension piece, if the barbecue is supplied with a match extender.
•
Keep your face as far away as possible from the barbecue and point the extended match
•
through the openings in the grille toward the burner.
Place the match close to the burner openings and turn the control knob to the "HIGFI" position.
•
Note: If, after several attempts, you are still not able to light the barbecue, please
•
contact your sales outlet.
31
Advertenties
Hoofdstukken
Inhoudsopgave
