– All file and cutting attachments are coated with a sapphire grain.
This guarantees extremely long life and almost guarantees freedom from-
wear.
– You can select one of two speed settings (Hi and Lo). Press the corre-
sponding button on the device
– Do not exert heavy pressure and always guide the attachments carefully
over the surface to be treated.
– Move the instrument under light pressure in circular movements slowly
over the parts to be treated.
– Note that the cutting attachments will have a reduced effect if the skin is
softened or moist. For this reason, do not carry out any pretreatment in a
bath.
– Do not remove all the callus skin in order to retain the natural protection
of the skin.
– Always ensure that the spindle can rotate freely. It must never be perma-
nently jammed, otherwise the instrument will become too hot and suffer
damage.
!
– After every use, apply moisturizing cream to the parts treated.
Important:
Check the results during treatment. This is particularly important
for diabetics, since their hands and feet are less sensitive.
3.2 Attachments
As these are attachments for use by professionals, we would ask you to
handle them with care as they can cause injury when used incorrectly. Parti-
cular caution is advised at higher speeds.
The following attachments are provided with your appliance:
1 – Sapphire disk, fine
Filing and treatment of the nails, fine grained
sapphire disk. The specific aspect of this
sapphire disk is that only the inner disk rotates,
while the outer support is stationary. This enables
precise filing of the nails without the risk of bur-
ning the skin with the fast rotating disk.
15