Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Power mode
This function is suitable for boiling water and soups.
Place the pot in the middle of the cooking area.
Touch ON/OFF
one time and after that the function
(Zeichen) is on and in the display there is 1200 is shown. The cooling fan starts work-
ing. With the buttons
– 2000Watt)
During cooking the Wattage can be changed at any time.
The unit is equipped with an overheat protection. When the pot gets too hot, the
appliance will stop working, a sound can be heard and in the display E02 can be seen.
In that case, press the ON/OFF
appliance will work after that without any problem.
When the failure code E0 is in the display then the used pot or pan is not
suitable induction cookers. The appliance beeps 9 times and after ca 30
seconds the appliance will switch to the stand-by mode.
Temperature mode
This function is suitable for roasting meat and vegetables.
Place the pot in the middle of the cooking area.
Touch ON/OFF
one time and after that 3 times the function button
bellow the temperature symbol and in the display 180 can be seen. The cooling fan
starts to work. With the buttons
degree steps. During the cooking the temperature can be adjusted at any time. The
build in sensor keeps the temperature at about the adjusted temperature. The tem-
perature can be adjusted from 60°C up to 240°C.
When the failure code E0 is in the display then the used pot or pan is not
suitable induction cookers. The appliance beeps 9 times and after ca 30
seconds the appliance will switch to the stand-by mode.
14
or
can the power be adjusted in steps of 200W. (200Watt
and cool the appliance down for some minutes. The
or
the temperature can be adjusted in 20
, the red LED bellow Heating
. A red LED
Advertenties
Inhoudsopgave
