Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
f) Bluetooth
mode
®
If this is the first time you are using your Bluetooth
After pairing, the soundbar will recognize your Bluetooth
Please note that it may take several seconds for the connection to be established. If no connection is established
within 2 minutes, the soundbar will switch to the previously connected audio source.
The transmission range is approximately 8 m in direct visibility. Objects placed between the Bluetooth
devices may reduce the transmission range.
Check the technical specifications of your Bluetooth
with all devices. Some wireless devices require you to enter a password when pairing. In this case, enter
"0000".
If the Bluetooth
automatically restored once the signal strength improves.
Proceed as follows to establish a Bluetooth
• Turn the soundbar on.
• Press the SOURCE button (6, 24) repeatedly to switch on Bluetooth
slowly. The soundbar is now in pairing mode.
• Activate Bluetooth
on your mobile device (e.g. smartphone) and scan for Bluetooth
®
appears on the display of your mobile device with the name "renkforce TB240WW".
If the soundbar's Bluetooth
button. The soundbar emits the audible message "Pairing" (establishing a connection) and the Bluetooth
indicator flashes quickly.
• Select "renkforce TB240WW" to pair the devices. The soundbar emits the audible message "Paired" (connection
established) in confirmation and the Bluetooth
• You can now start playback on your mobile device.
Disconnect the Bluetooth
• Switch the soundbar to a different audio source (e.g. AUX).
• Deactivate Bluetooth
on your mobile device. The soundbar emits the audible message "Disconnected" (connection
®
lost) in confirmation.
• Press the BT PAIR (27) button. The soundbar emits the audible message "Pairing".
Music playback from your Bluetooth
• The soundbar supports the following profiles in Bluetooth
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio/Video Remote Control Profile) - Music control via the soundbar remote control and
• If your mobile device supports AVRCP, you can use the following buttons on the remote control for music control:
Button
(26)
(25)
Buttons
/
All manuals and user guides at all-guides.com
-enabled device with the soundbar, both devices must be paired.
®
signal is weak, the connection to the soundbar may be lost. The connection will be
®
®
name does not appear on your mobile device, press the BT PAIR (27)
®
indicator is lit solid.
®
connection one of the following ways:
®
device
®
- Audio playback
- Play, pause
- Previous/next track
device automatically when Bluetooth
®
device before pairing. Compatibility is not guaranteed
®
connection:
mode. The Bluetooth
®
mode:
®
Audio playback
mode is activated.
®
®
indicator (2) flashes
®
devices. The soundbar
®
®
39
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
