Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cordless Heat Gun 20 V
Introduction
We congratulate you on the
purchase of your new prod-
uct. You have chosen a high
quality product. The instructions for use are part
of the product. They contain important informa-
tion concerning safety, use and disposal. Before
using the product, please familiarise yourself with
all of the safety information and instructions for
use. Only use the product as described and for
the specified applications. If you pass the prod-
uct on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The product is suitable for removing coats of
paint on small surfaces, for heating (for exam-
ple, shrink tubing), and for plastic deformation
and welding. It can be used to loosen adhesive
joint and defrost water pipes. This equipment is
not suitable for commercial use. Commercial use
will invalidate the guarantee. Any other use that
is not explicitly approved in these instructions may
result in damage to the equipment and represent
a serious danger to the user. The use of the prod-
uct in the rain or a damp environment is prohib-
ited. The manufacturer is not liable for damage
which is caused through inappropriate use or in-
correct operation. The product is part of the
Parkside X 20 V TEAM series and can be oper-
ated using Parkside X 20 V TEAM series batter-
ies. The batteries may only be charged using
chargers from the Parkside X 20 V TEAM series.
Scope of delivery
Carefully unpack the product and check that it
is complete:
1 Cordless Heat Gun
1 Restrictor
1 Surface nozzle
1 Reflector nozzle
1 Operation and safety notes
Battery and charger are not included.
Parts description
Blow-off pipe
1
Air inlet
2
ON/OFF switch
3
Release switch
4
Charger
5
Rechargeable battery
6
Release button
7
Restrictor
8
Reflector nozzle
9
Surface nozzle
10
Level 1 Switch (for blowing hot air up to
11
250 °C)
Level II Switch (for blowing hot air up to
12
550 °C)
Level 0 switch (blow room temperature air
13
for cooling)
LEDs
14
Base
15
Functional description
The product can be operated at three tempera-
ture levels. On level "0", room temperature air
will be blown out for cooling. On level "I", an
air temperature up to 250 °C is reached (by us-
ing supplied restrictor
uct reaches an air temperature up to 550 °C
(by using supplied restrictor
the descriptions below for information on how
the operating elements work.
). On level II, the prod-
8
). Please refer to
8
GB/IE/NI
7
Advertenties
Hoofdstukken
Inhoudsopgave
