Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Aria Installation Instructions
•
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling
fan wiring via the quick connector plug.
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
•
and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using
the screws provided.
REMOTE CONTROL
Your ceiling fan is controlled by the remote control.
Before operating the remote, the following must be
considered.
-
1 x CR2032 3V battery is required to
operate the remote control. Pull out the
battery tray (2) by pressing the click (1) of
the battery tray. Place the battery (3) on the
tray and insert the tray back to remote hand
set (4) indicated by "+" polarity symbol (5).
Ensure the polarity is correct as shown in
the battery compartment.
8 | P a g e
FINISHING THE INSTALLATION
USING YOUR CEILING FAN
Fig. 10
Fig. 9
Advertenties
Inhoudsopgave
