Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Aria Installation Instructions
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and get familiar with the
buttons and function of each button. (Fig.11)
1. IR TRANSMITTER
2. HI button: Press the button to set fan running at High speed.
3. MED button: Press the button to set fan running at Medium speed.
4. LOW button: Press the button to set fan running at Low speed.
5. OFF button: Press the button to turn OFF the fan.
6 / 7 / 8. 1Hr / 3 Hr / 6Hr fan timer button: Press the button to activate the fan timer fuction, the fan will
turn off after running 1 hour / 3 hours / 6 hours.
9. LIGHT button: Press the button to turn ON/ OFF the light.
The LED light has a 3-step dimmable function which is controlled by an ON/OFF switch.
When the LED light is ON and at 100% brightness, press the light button "ON and then OFF within 5
seconds", to dim the LED light. Repeat pressing ON and then OFF within 5 seconds to dim further in
the following sequence: 100% brightness → 60% brightness → 10% brightness → 100% brightness.
To switch back to 100% brightness at any stage, turn OFF the luminaire, and then wait after 5
seconds turn ON the luminaire, it will reset to 100% brightness.
9 | P a g e
Fig. 11
Fig. 12
Advertenties
Inhoudsopgave
