Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
28
www.electrolux.com
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
To activate the function: touch
Touch
or
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
4.7 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.8 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
All manuals and user guides at all-guides.com
and touch
. The
.
.
.
of the timer to set the
.
.
.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
4.9 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
4.10 Power management
function
• All cooking zones are connected to
one phase. See the illustration.
• The phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones.
• The function activates when the total
.
electricity loading of the cooking
zones exceeds 3700 W.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones changes between two
levels.
.
comes on.
.
comes on.
.
.
for 4 seconds.
the function
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
