Preparing For Cold Lamination - UNITED OFFICE ULG 350 B1 Beknopte Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor ULG 350 B1:
- Gebruiksaanwijzing (60 pagina's) ,
- Gebruiksaanwijzing (74 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Preparing for cold lamination
IMPORTANT
►
After hot laminating, allow the laminator to cool down completely before
beginning with cold lamination. Bear in mind, the rollers inside the laminator
will still be hot. This could damage the laminating pouch and the document
to be laminated!
♦
Insert the plug of the laminator into a mains power socket.
♦
Switch the appliance on by pushing the On/Off switch
The red Power indicator light
♦
Set the selector switch for hot and cold lamination
Ready indicator light
♦
Place the pouch thickness switch
(see also chapter Switching levels).
♦
Place the document to be laminated into a laminating pouch of the appropriate
size.
NOTICE
►
Ensure that all edges of the document have at least two millimetres of space
to the edges of the laminating pouch, as shown in Fig. 1.
►
Make certain that you use only one pouch for laminating. First flip it up, as
shown in Fig. 2.
►
For further information about the lamination process, please read the section
Lamination process.
■
8
│
GB │ IE
lights up.
2
lights up.
3
at the corresponding pouch thickness
4
to the "ON" position.
5
to "COLD". The green
6
ULG 350 B1
Advertenties
Hoofdstukken
Inhoudsopgave
