Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
30 www.aeg.com
Problem
The anti-flood device is on.
After the checks are completed, activate
the appliance. The programme contin-
ues from the point of interruption.
If the problem occurs again, contact the
Service.
If the display shows other alarm codes,
contact the Service.
10.1 If the washing and drying
results are not satisfactory
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is
too much. Adjust the rinse aid selector
to a lower position.
• The quantity of detergent is too much.
Stains and dry water drops on glasses
and dishes
• The released quantity of rinse aid is
not sufficient. Adjust the rinse aid se-
lector to a higher position.
• The quality of the detergent can be
the cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature dry-
ing phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the combi detergent
tablets can be the cause. Try a differ-
ent brand or activate the rinse aid dis-
penser and use rinse aid together with
the combi detergent tablets.
11. TECHNICAL INFORMATION
Dimensions
Electrical connection
Possible solution
Make sure that the drain hose has no kinks
or bends.
Close the water tap and contact the Service.
10.2 How to activate the rinse
aid dispenser
1. Press the on/off button to activate
2. Press and hold, at the same time, De-
3. Press Option .
4. Press Option to change the setting.
5. Press the on/off button to deactivate
6. Adjust the released quantity of rinse
7. Fill the rinse aid dispenser.
Width / Height / Depth
(mm)
Refer to the rating plate.
Voltage
Refer to 'HINTS AND TIPS' for
other possible causes.
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
lay and Start until the indicators of
,
and
start to flash.
• The indicators of
go off.
• The indicator
flash.
• The display shows the current set-
ting.
Rinse aid dis-
penser off
Rinse aid dis-
penser on
the appliance and to confirm the set-
ting.
aid.
596 / 818 - 898 / 575
and
continues to
220-240 V
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
